Table of Contents
Advertisement
B. IP Address Configuration
Enter → [IP] navigation column, the page used to configure the address of the device management. The current status ad-
dress of the device, a mask, router will be displayed in the form. After modifying the contents of the form, click [Save] button
to complete the address modification or click [Reset], it will be restored to the original value form content unmodified.
Router is optional item, default is empty. Set relevant parameters, click [Save] button to complete the configuration.
IP interface: Interface items introduction (May different VLAN set different IP addresses, to meet the different hosts in
VLAN access to the switch).
Interface items
Configuration
Delete
Select / not selected
VLAN
1~4095 number
DHCP
Select / not selected
Address
Switch IP address
Mask Length
1-30
Add Interface
8
BCD-RGD-804P-MT
Introduction
Select this option to delete an existing IP interface.
The VLAN associated with the IP interface. Only ports
in this VLAN will be able to access the IP interface. This
field is only available for input when creating an new
interface.
Enable the DHCP client by checking this box. If this
option isenabled, the system will configure the IP
address and mask of the interface using the DHCP
protocol.
The IPv4 address of the interface in dotted decimal
notation.
The destination IP network or host mask, in number of
bits (prefix length).
Add an IP address settings
Factory setting
not selected
No
not selected
192.168.0.240
24
www.bcdvideo.com
Advertisement
Table of Contents
