BCDVideo BCD-RGD-804P-MT User Manual page 36

Basic configuration: Interface items introduction:
Interface items Configuration
Protocol Version STP/RSTP
Bridge Priority 0/4096/...../61440
Forward Delay 4-30 second
Max Age 6-40second
And <=
(Forward Delay-1) X 2
Maximum Hop 6-40
Count
Transmit Hold
1-10
Count
Advanced configuration:
Interface items Configuration
Edge Port BPDU
Select/not select
Filtering
Edge Port BPDU Select/not select
Guard
Port Error Select/not select
Recovery
Port Error Re- 30-86400 second
covery Timeout
36
BCD-RGD-804P-MT
Introduction
Spanning tree protocol version
Controls the bridge priority. Lower numeric values have
better priority. The bridge priority plus the MSTI instance
number, concatenated with the 6-byte MAC address of the
switch forms a Bridge Identifier.
The delay used by STP Bridges to transit Root and Desig-
nated Ports to Forwarding (used in STP compatible mode).
Valid values are in the range 4 to 30 seconds.
The maximum age of the information transmitted by the
Bridge when it is the Root Bridge. Valid values are in the
range 6 to 40 seconds, and Max Age must be
This defines the initial value of remaining Hops for MSTI
information generated at the boundary of an MSTI region.
It defines how many bridges a root bridge can distribute its
BPDU information to.
The number of BPDU's a bridge port can send per second.
When exceeded, transmission of the next BPDU will be
delayed. Valid values are in the range 1 to 10 BPDU's per
second.
Introduction
Control whether a port explicitly configured as Edge will
transmit and receive BPDUs.
Control whether a port explicitly configured as Edge will
disable itself upon reception of a BPDU. The port will enter
the error-disabled state, and will be removed from the
active topology.
Control whether a port in the error-disabled state auto-
matically will be enabled after a certain time. If recovery is
not enabled, ports have to be disabled and re-enabled for
normal STP operation. The condition is also cleared by a
system reboot.
The time to pass before a port in the error-disabled state
can be enabled. Valid values are between 30 and 86400
seconds (24 hours).
Factory setting
RSTP
32768
15
20
20
6
Factory setting
not select
not select
not select
No
www.bcdvideo.com