BCDVideo BCD-RGD-804P-MT User Manual page 25

BCD-RGD-804P-MT
B. ACL (Access Control List) Configuration
ACL Port Configuration
Enter [ACL configuration] → [Ports] navigation column, Configure the ACL parameters (ACE) of each switch port. port only can
receive the frames matching ACE parameter. Also define eight per port policy number, each policy is defined different content,
you can configure the following parameters Series: Action , Permit / Deny to specify the type of data packet forwarding, Rate
Limiter ID , Port Redirect , 16 bandwidth control policies for network security configuration page definitions; Logging (logging):
Enable / Disable logging;
25