BCDVideo BCD-RGD-804P-MT User Manual page 24

System configuration interface items introduction;
Interface items
Mode
Reauthentication Enabled Check / uncheck
Reauthentication
Period
EAPOL Timeout
Aging Period
Hold Time
Port configuration interface items introduction
Interface Configuration
Port 1-n (# of physical
ports)
Admin State Force Authorized
Force Unauthorized In this mode, when a client is connected to the port, the switch will
802.1X
MAC-Based Auth.
Port State Globally Disabled
Link Down
Authorized
Unauthorized
X Auth/YUnauth
Restart Reauthorized
Reinitialize
24
Configuration Introduction
Disabled/Enabled Indicates if NAS is globally enabled or disabled on the
switch stack.
Once selected, after the authentication is successful,
a set time after the Reauthentication Period, will be
certified again
0-255 byte SNMP group name
1-3600 second Recertification interval
1-65535 second Identity EAPOL defined time frame resend request, and
this time on the MAC-based authentication is invalid
10-1000000 second Certification aging time, after authentication, within
Aging Period of time no longer detect the device, the
authentication will automatically lapse
10-1000000 second After the authentication fails, the re-certification inter-
vals, during this time do not accept the authentication
request of the terminal
Introduction
To configure the switch port number port
In this mode, when a client is connected to the port, the switch will
automatically send an EAPOL success frame, you can access the net-
work without authentication
send an EAPOL frame failure, any client cant access the network
Using 802.1X authentication mode
Using MAC-Based authentication mode
NAS all Disabled
NAS all Enabled, but port can't be connected
Port operates in Force Authorized mode, or work in only one request
mode, and the request authentication success
Port operates in Force Unauthorized mode, or work in only one re-
quest mode, and the request authentication not success
The port is a plurality of request mode, X client successfully authenti-
cates, Y client authentication is unsuccessful
Authorized buttons only when the authentication mode in the open,
while the port state of 802.1X / MAC-Based Auth. When it is enabled,
click Reauthorized immediately for certification has passed recertifi-
cation
Reinitialize button only when the authentication mode in the open,
while the port state of 802.1X / MAC-Based Auth. When it is enabled,
click Reinitialize initialize the client immediately forced to cut off the
last certification, recertification
BCD-RGD-804P-MT
Factory setting
Disabled
uncheck
Default_ro_group
3600
30
300
10
Factory setting
1-n
Force Authorized
Note: If set to a
non Force Autho-
rized port, you can
not open the port
Spanning tree,
and Aggregation
functions
www.bcdvideo.com