BCDVideo BCD-RGD-804P-MT User Manual page 73

ACL Status
Enter [ACL Status] navigation column, on statistics page, can view related security information, Use view all kinds network
security information through select the drop-down navigation Combined, Static, IPMC, LOOP, conflict. User can select
<Auto-refresh>button to refresh data in real time, Can also be manually Click <Refresh> button to see the new data.
Interface items introduction:
Interface items
User
Ingress Port
Frame Type
Action
Rate Limiter
Port Redirect
Mirror
CPU
CPU Once
Counter
Conflict
Introduction
Indicate to access list user
Access ingress input port: All/Port1-n
Any: ACE matching all frame type
Type: ACE matching Ethernet type frame not IP frame and ARP frame
ARP: ACE matching ARP/RARP frame
IPV4: ACE matching all IPV4 frame
IPV4/ICMP: ACE matching IPV4 frame with ICMP protocol
IPV4/UDP: ACE matching IPV4 frame with UDP protocol
IPV4/TCP: ACE matching IPV4 frame with TCP protocol
IPV4/other: ACE matching IPV4 frame with other protocol except ICMP/UDP/TCP
IPV6: ACE matching all standard IPV6 frame
Permit: forward and learn the frame matching ACE
Deny: discard the frame matching ACE
Filter: filter the frame matching ACE
Disabled/0-16: rate limit ID use on port
Disabled/Port ID: Whether Port Frame is re-directed, if redirect ,redirect port
Disabled/Enabled【The frame Be mirrored/not mirror receiving from the port
Packet matching ACE forward to CPU
The first packet matching ACE forward to CPU
Packet counter matching ACE
Firmware state
BCD-RGD-804P-MT
73