Web Configuration; Preparing And Entry; Switch Default Configuration; Computer Basic Configuration Requirement - BCDVideo BCD-RGD-804P-MT User Manual

1 WEB configuration

1.1

Preparing and Entry

Configure the switch through Web pages, this chapter will take you through the equipment configuration process.
After completing the hardware installation, you need to ensure that the computer networks parameters to meet certain
conditions before accessing the Settings page.
1.1.1

Switch Default Configuration

The system default IP address is: 192.168.0.240, user name: admin; password: admin
1.1.2

Computer basic configuration requirement

Ethernet card installed, you can access the Internet through a network port. we recommend using a Computer (or better),
minimum display resolution support 1024 * 768 pixels for better view.
1.1.3

Establish network connection

Open network parameter configuration of Computer shown as below. Select the Internet Protocol (TCP / IP), enter the
Internet Protocol (TCP / IP) Properties window. Select the input IP address in addition to the default IP address and subnet
mask (255.255.255.0), click on the OK button to complete the operation.
(Note: The IP address and switch must be in the same subnet.)
BCD-RGD-804P-MT
3