BCDVideo BCD-RGD-804P-MT User Manual page 58

Interface items introduction:
Interface items
QCE#
Port
Key Parameters Frame
Type
Key Parameters SMAC
Key Parameters DMAC
Key Parameters VID
Key Parameters PCP
Key Parameters DEI
Action Class
Action DPL
Action DSCP
F. Qos storm control configuration
Enter [Storm Control] navigation column, configure QoS port storm control, open for unicast, multicast, rate limit broad-
cast storms, and set rate. The main configuration items : Unicast (unicast frames), Multicast (multicast frames), Broadcast
(broadcast frames).
58
Configuration
All/ port no
Any/Ethernet/LLC/SNAP/
IPV4/IPV6
Any/Specific
Any/UC/MC/BC
Any/Specific(1-4095)/
Range(VID1~VID2)
Any/0,1,2,3,4,5,6,7/0-1,
2-3,4-5,6-7,0-3,4-7
Any/0/1
0-7
Default/0/1
Default/0-63
BCD-RGD-804P-MT
Introduction
QoS list item Index
Includ port
Select the recognized frame type for the input data
flow
Select the recognized MAC address OUI
(Organization ID) for the input data flow
Select a frame input data stream to identify the desti-
nation MAC address type:
Any: Destination can be any type of MAC
UC: Destination only to allow unicast MAC
MC: Destination only to allow multicast MAC
BC: Destination MAC only to allow broadcast
The frame VLAN ID range to be recognized of the
input data stream,
Any: All VLAN
Specific: a specific VLAN
Range: a VLAN range
Select the recognized priority for the input data flow
Select the recognized discard flag for the frame of
input data flow
Add type value for frame matching key parameters
Add discard value for frame matching key parameters
(Default: Retain the original DPL)
Add DSCP value for frame matching key parameters
(Default: Retain the original DSCP)
Factory setting
Any
Any
Any
Any
Any
Any
0
Default
Default
www.bcdvideo.com