BCDVideo BCD-RGD-804P-MT User Manual page 32

Aggregation algorithm mode: Interface items introduction:
Interface items
Source MAC Address
Destination MAC Address Select/not select The Destination MAC Address can be used to calculate the
IP Address
TCP/UDP Port Number
Aggregation configuration: This configuration is used to configure the Aggregation hash mode and the aggregation group.
The aggregation hash mode settings are global, whereas the aggregation group relate to the currently selected stackunit,
as reflected by the page header.
Interface items Configuration
Group ID Normal/1-5
Port Members Select/not select Each switch port is listed for each group ID. Select a radio button to
32
Configuration Introduction
Select/not select The Source MAC address can be used to calculate the
destination port for the frame. Check to enable the use of
the Source MAC address, or uncheck to disable. By default,
Source MAC Address is enabled.
destination port for the frame.
Select/not select The IP address can be used to calculate the destination
port for the frame.
Select/not select The TCP/UDP port number can be used to calculate the
destination port for the frame.
Introduction
Indicates the group ID for the settings contained in the same row.
Group ID "Normal" indicates there is no aggregation. Only one group
ID is valid per port.
include a port in an aggregation, or clear the radio button to remove
the port from the aggregation. By default, no ports belong to any
aggregation group. Only full duplex ports can join an aggregation
and ports must be in the same speed in each group.
BCD-RGD-804P-MT
Factory setting
not select
not select
not select
not select
Factory setting
Normal
not select
www.bcdvideo.com