BCDVideo BCD-RGD-804P-MT User Manual page 28

Interface items Configuration
Ingress Port All/Port1-n(Number of physical ports) All: ACE matching all Ingress port
Policy / Bitmask
Policy: 0-255
Bitmask: 0x0-0xff
Frame Type Any
EType
ARP
IPV4
IPV4/ICMP
IPV4/UDP
IPV4/TCP
IPV4/other
IPV6
Action
Permit
Deny
Filter
Rate Limiter
Disabled/0-16
Port Redirect Disabled/port no
Mirror Disabled/Enabled
Counter
28
List Change button:
+: ACE insert an item in the current row;
e: Edit ACE;
↑: Move the list ACE;
↓: Down ACE in the list
X: Delete ACE
+: In the bottom of the list to add an ACE item
BCD-RGD-804P-MT
Introduction
Port1-n: ACE matching a Ingress port
Designation ACE strategies code and bit
mask
ACE match all frame types
ACE matching the Ethernet frame type,
not match IP and ARP frames
ACE matching ARP / RARP frame
ACE match all IPV4 frame
ACE matchingIPV4 frames with the ICMP
protocol
ACE matchingIPV4 frames with the UDP
protocol
ACE matchingIPV4 frames with the TCP
protocol
ACE matching the otherIPV4 frames
except ICMP / UDP / TCP protocol
ACE match all IPV6 frame
Forwarding and Learning with ACE
matching frame
Discard the ACE matching frame
Filtering the ACE matching frame
Select this port to be used for rate limit-
ing ID number
Select a port frame whether redirected,
if redirected, set the redirection port, if
Action is selected Permit, you can not
choose to redirect
In the frame of this port is not receiving
Mirror / mirrored
The counter of frames and port settings
match ACE
Factory setting
All
Any
Any
Permit
Disabled
Disabled
Disabled
0
www.bcdvideo.com