BCDVideo BCD-RGD-804P-MT User Manual page 13

Modify the account password
In the User Interface, click the account that you want to modify;
Interface items introduction:
Interface items
Old Password
New Password
Confirm New Password
B. Login authentication mode setting
Enter [Switch] → [Auth Method] navigation col-
umn, this page is used to set the manner in which
authentication when users access the switch .
When you select the authentication mode is "none", no authentication enabled, you cannot login into the system.
When you select the authentication mode is "local", enable user name and password to log in the system's local user database.
When you select the authentication mode is "radius", enable remote server for authentication.
Set relevant parameters, click [Save]to save changes.
Click [Reset] to undo any changes made locally and revert to previously saved values.
Introduction
Enter the password currently used, if the old password is entered
incorrectly, the new password is not enabled
Enter the new password, the length of the bit characters <0-30>
characters
Re-enter the same new password, or can not be enabled
BCD-RGD-804P-MT
13