BCDVideo BCD-RGD-804P-MT User Manual page 59

Interface items Configuration
Frame Type
Enable Select/not select
Rate
1-1024Kpps
5.2.2.17 Mirroring configuration
Enter [Mirroring] configuration navigation column, Port mirror-
ing, will complete mapping to the specified port for some port
or control packets flow, the designated port as the destination
port, the port is mapped source port mirroring, port mirroring
connected to the network analytical instruments , you can clear
analysis mirroring port packets without disrupting the business
of mirroring source port. Port mirroring is a convenient re-line
monitoring. All ports system can be configured as a mirrored
port, but the destination port mirroring can only configure one.
When a port is configured as a mirrored port, the corresponding
port cannot be configured as a source port. Source port means
that mirrored port, you can configure multiple destination port
mirroring to only configure one.
BCD-RGD-804P-MT
Introduction
Data frame type, Unicast; Multicast: Broadcast
On/off storm control
Select the data rate upper limit
Factory setting
Not select
1pps
59