BCDVideo BCD-RGD-804P-MT User Manual page 40

B. IGMP Snooping VLAN Configuration
Enter [IGMP Snooping Configuration] → [VLAN Configuration] navigation column, Click Add New IGMP VLAN button, enter
VLAN ID 1-2, tick Snooping enable option, click [Save] button to complete the IGMP Snooping VLAN configuration.
Click the Delete button before corresponding VLAN ID, click [Save] button to complete the IGMP Snooping vlan deleted.
IGMP Snooping VLAN number on the page displayed shows up to 99, 20 per default .by the following three keys can be
updated, view the list.
Refresh the display list
Previous displays list
Back displays list
Interface items introduction:
Interface items Configuration
Delete
VLAN ID
1-4095
Snooping Tick/not tick
Enabled
Querier Election
Tick/not tick
Querier Address IP address
40
Introduction
Delete the corresponding IGMP Snooping VLAN list
Setting IGMP Snooping VLAN, range: 1-4095
On / Off the corresponding VLAN Snooping function, VLAN
up to make the function 32
Enable / Disable IGMP querier after opening can be select-
ed as the interrogator, after closing will not be selected for
the query is
Setting IGMP query IP address, if not , the default address
for the VLAN management, if the corresponding man-
agement address is not set, it defaults to the first VLAN
management address, if not VLAN management address,
the system defaults to 192.0 .2.1
BCD-RGD-804P-MT
Factory setting
No
not tick
tick
0.0.0.0
www.bcdvideo.com