BCDVideo BCD-RGD-804P-MT User Manual page 21

Interface items Introduction:
Interface items Configuration
View Name
0-255 byte
View Type
Included/excluded
OID Subtree Use "," separated string of numbers
Default_rw_group
G. SNMP Access Configuration
Enter [SNMP configuration] → [Access] navigation column, Configure SNMPv3 access table on this page. Configure when a
group users access of the security mode , security levels, read-only view and read-write view. Click [Save]to save changes.
Click [Reset] to return to the default values.
Interface items Introduction:
Interface items Configuration
Group Name 0-255 byte
Security Model any/v1/v2c/usm
Security Level
NoAuth, NoPriv
Auth, NoPriv
Auth, Priv
Read View Name None/view configuration
Write View Name
None/view configuration
BCD-RGD-804P-MT
Introduction
View name
View only included/exclude OID subtree node
OID Mark
Introduction
User group name to access
Select the security mode, any mode / v1 / v2c / usm for
user group
Select security level for user group: No authentication
and no privacy
Authentication and no privacy.
Authentication and privacy.
Select the desired view name for user
Select the desired write view name for user
Factory setting
default_view
Included
.1
Factory setting
default_ro_group
default_rw_group
any
NoAuth, NoPriv
Default view
None
Default view
21