BCDVideo BCD-RGD-804P-MT User Manual page 44

Power Over Ethernet Configuration: Interface items introduction:
Interface items Introduction
Reserved Power Class/Allocating /LLDP-MED
determined by
Power Management
Actual Consumption/Reserved Power
Mode
Tx Delay After LLDP configuration change, time to re-transmission and the last time
interval between frames LLDP, <= 1/4 Tx Interval
TxReinit
Time interval between LLDP stop frame and a new start frame
PoE Power Supply Configuration
Interface items
Primary Power Supply[W]
PoE Port Configuration
Interface items
PoE Mode
Priority
Maximum Power[W]
5.2.2.13 MAC Table
Enter [MAC Table] navigation column, set the MAC address table dynamically updated timeout, MAC address table learning
mode, and manually add static MAC address table. Static MAC address table can add up to 64 MAC addresses.
Click<Add New Static Entry> button, enter the VLAN ID, a legitimate MAC address, select the port member, click [Save] button
to complete the configuration MAC address table.
44
Introduction
2000
Introduction
Disabled/PoE/PoE+
Low/High
BCD-RGD-804P-MT
Factory setting
Class
Reserved Power
2
2
Factory setting
2000
Factory setting
Disabled
Low
15.4
www.bcdvideo.com