BCDVideo BCD-RGD-804P-MT User Manual page 11

Interface items introduction:
Interface items Configuration
Port
Link
Speed Current Info/Warning/Error Display port status and mode
Speed Configured Disable
Auto
10Mbps HDX
10Mbps FDX
100Mbps HDX
100Mbps FDX
1Gbps FDX
Flow Control
Current Rx
Flow Control
Current Rx
Flow Control Check / uncheck
Configured
Maximum Frame 64-10056Byte
Size
Excessive Collision Discard/Restart
Mode
BCD-RGD-804P-MT
Introduction
Physical port number
Port status display, a red light indicates that the link is dis-
connected status, green indicates normal connection link
Prohibition to transfer data through the port
Allows the port and the connected devices automatically
adjust speed according to IEEE 802.3u
In accordance with the rate selection, full / half duplex com-
munication rate and to determine its mode of operation.
Indicates whether received the port flow control pause
frames
Indicate port whether send the flow control pause frames
On / off flow control
Set the port of the maximum data frame
length
When the transfer conflict, whether retransmission of
dropped packets: discard / retransmission
Factory setting
Info
Disable
X
X
uncheck
9600
Discard
11