BCDVideo BCD-RGD-804P-MT User Manual page 19

Interface items introduction:
Interface items Configuration
Community 0~255 byte
Source IP IP address
Source Mask Subnet Mask
D. SNMP Users Configuration
Enter [SNMP Configuration] → [Users] navigation column, Configure SNMPv3 user table on this page. Configure Authentication
security mode, security level, and data reported level of security, encryption mode for particular user when access identity
verification when accessing
Interface items introduction:
Interface items Configuration
Engine ID 16Decimal
User Name 0-32 byte
Security Level NoAuth, NoPriv
Auth, NoPriv
Auth, Priv
Authentication MD5/SHA
Protocol
Authentication 8-32 characters
Password
Privacy Protocol DES/AES
Privacy Password 8-32 characters
Introduction
Community (Authenticate string)
Community Source IP address
Community Source Mask
Introduction
Engine IDAs Engine ID authoritative SNMP it used to identify
SNMP entities, authentication and encryption
User name
Security levels: no authentication, no privacy
authentication, no Privacy
authentication, Privacy
Select the authentication encryption algorithm
Authentication Password
Choose packet encryption algorithm
Packet encryption password
BCD-RGD-804P-MT
Factory setting
No
0.0.0.0
0.0.0.0
Factory setting
800007
e5017f000001
0.0.0.0
NoAuth, NoPriv
MD5
NO
DES
NO
19