Figure 23. Load Settings Selections; Figure 24. Saving Settings - JAI TM-770 User Manual

4.2.1.2
Selecting Load Settings causes the camera to open a separate window that allows the user to select the camera
settings they will use to interface with the computer. The factory defaults are saved in the camera. Users can
access UserSet1 and UserSet2 once settings have been saved into the camera.
Figure 23.
4.2.1.3
Selecting Save Settings causes the camera to open a separate window that allows the user to save their
currently configured camera settings. As a user you can create UserSet1 and UserSet2 by selecting the
appropriate line of the drop down menu. Factory Defaults can not be overwritten.
Figure 24.
4.2.1.4
Selecting Exit closes the JAI TM-77X Camera Control program.
28
TM-77X Series
Load Settings
Load Settings Selections
Save Settings
Saving Settings
Exit
Software Introduction & Installation