Duplex Mode - Funkwerk FT4 Operating Manual

Duplex mode

An individual call in duplex mode is a full-duplex voice connection in which you hold
the radio set near your ear just like a telephone set. During this time, both you and
the called subscriber can listen and speak at the same time.
Starting a call
Prerequisite:

The display shows the idle display or the screen saver.
Carry out the following work steps:
1. Enter the call number. Choose one option:

Entering the call number using the number keys.

Selecting the call number from the subscribers' list: Navigate to
A
DDRESSES
The condition as shown appears in the following cases:

After entering the call number in the idle condition.
After highlighting the user in the user list and ‹Calling›.


After marking the user and
Starting from this display, start the call by
>U in the display and highlight the desired user.
SER LIST
‹Picking
up›.
‹Picking up›.
Operation 85
Individual calls
M >
AIN MENU