Funkwerk FT4 Operating Manual page 79

‹Right softkey›
4. Press the
‹Volume/group call›
This setting is saved.
The display shows the idle display again. In the idle display, the selected group is
shown.

Done.
TIP
The group selection sub-menu can also be accessed from the idle display, using
either the M > A
ENU
G paths. The group selection function of the rotary control may have been
ROUP LIST
blocked while programming the radio set.
key to execute the
knob again briefly.
> P
DDRESSES REFERRED GROUPS
S function, or press the
ELECT
or M > A
ENU
Operation
Group calls
>
DDRESSES
75