Sensor Test - Funkwerk FT4 Operating Manual

‹Right softkey›
4. Press the
The radio set will then prompt you to perform the sensor test, see section „Sensor
test" (p. 127).
After successfully completing the sensor test, the radio set logs into the personal
emergency signal centre.

Done.

Sensor test

During the sensor test, the radio set tests the integrated sensors. Before the radio set
logs into the personal emergency signal centre, the radio set will prompt you to test
the sensors.
Please note:
During the sensor test, the sensors for all emergency signal functions programmed
on the radio set are being tested. In the meantime, you have to initiate a variety of dif-
ferent actions on the radio set. These actions are described in section „Perform the
sensor test" (p. 128).
The menu S
ENSOR TEST
individual sensor is tested consecutively. When a sensor passes the test, the perti-
nent display content changes from
nally (if programmed)
Display with menu S
ENSOR TEST
key to execute the function.
on the display guides you through the test procedure. Each
T to OK. An acoustic signal is heard additio-
EST
Personal emergency signal functions
Putting into operation
127