Operation; Switching On The Radio Set - Funkwerk FT4 Operating Manual

Operation

In this chapter, you can familiarise yourself with the operation of the radio set. Fre-
quent operation steps are described on the following pages.

Switching on the radio set

PLEASE NOTE
Operating radio sets may cause disturbances!
Switching on or operating your radio set may cause a hazard to you or to other per-
sons.

Switch on your radio set only if its operation does not expose any persons to a
hazard.

Do not switch your radio set on in places where the operation of radio sets is not
permitted.
Carry out the following work steps:
 ‹Hang up›
Press the
The display and keyboard illumination is switched on.
The radio set carries out a self-test. This will take a few seconds.
The radio set is connected with the TETRA infrastructure (if this has been pro-
grammed).
The display shows the idle display.

Done, the radio set is switched on.
key long.
Operation
Switching on the radio set
67