Frequencies Used; Tetra Radio Communications; Ios Localisation Signals; Gps-Localisation Services - Funkwerk FT4 Operating Manual

Tetra radio set
Table of Contents

Advertisement

16
Safety information
Antennas used for TETRA radio sets

Frequencies used

TETRA radio communications

Frequency range 380 MHz to 430 MHz or 410 MHz to 470 MHz.
The official frequency allocation by the local approval authorities is decisive.

IOS localisation signals

Fixed frequency 65.536 kHz.
Refer to the documentation for system-compatible IOS localisation beacons.

GPS-Localisation services

Fixed frequency 1.57542 GHz.

Emission of radio signals

Like any mobile communication unit, your radio set is a transmitter and receiver of
radio signals.
The unit meets EC requirements for the emission of radio signals.
The transmitter is designed so that the high-frequency (HF) energy threshold
values recommended by the Council of the European Union will not be exceeded
provided the intended use is respected.
These threshold values are part of comprehensive guidelines defining allowed HF
energy values for the general public.
These guidelines were prepared by independent scientific organisations, using
regular and thorough evaluation of scientific studies. These guidelines include a
substantial safety margin that is to guarantee the safety of persons of any age and
health condition.
TIP
You can find further information about the state of knowledge regarding possible
health hazards caused by TETRA radio signals on the internet on the web pages of
the German Federal Radiation Protection Office.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents