Group Calls; Selecting A Group - Funkwerk FT4 Operating Manual

Group calls

Group calls are voice connections a subscriber sets up to several other subscribers
at the same time. While one subscriber speaks, the other subscribers in that group
listen to this call.

Selecting a group

You can select a group with which you communicate mainly from the
list. From now on, pressing the
GROUPS
start a group call for this group. If the list is not programmed, the display shows the
G list. Select the desired group from this list.
ROUP LIST
Prerequisite:

The display shows the idle display.
Carry out the following work steps:
1. If required, press
as a rotary switch.
‹Volume/group call›
‹PTT (transmit key)›
knob longer in order to enable its function
Operation
Group calls
P
REFERRED
key will automatically
73