Transmitting A Status Message - Funkwerk FT4 Operating Manual

102 Operation
Messaging
5. Press the
The SDS text message is sent.

Done.

Transmitting a status message

A status message is a pre-defined text message that cannot be modified by the
sender. bit-coded data is transmitted to the recipient. This makes the transmission
time very short. The data is decoded on the recipient's unit, the original message is
being displayed. Prerequisite is:

Each pre-defined text message has the same meaning on the sender's and the
recipient's unit.

The data to be transmitted are encoded in the same manner on the sender's and
the recipient's unit.
Transmitting a status message (via menu)
Transmit a pre-defined text message by selecting the function in the menu of the
radio set.
Prerequisite:

The display shows the idle display.
Carry out the following work steps:
1. On the display, navigate to
The list of status messages is being displayed.
2. Highlight the desired status message using the cursor keys.
‹Left softkey›
key to execute the function
M
ENU
T
> M > S
ESSAGES TATUS
.
RANSMIT
.