Selection Mode; Select System; Edit System Name - Funkwerk FC4 Operating Manual

System Settings

Selection mode

....... Call up the «Selection mode» entry.
or
GB
radio button «automatic» or «exclusive».
Accept the setting with the right softkey [OK]. The display goes back
to the «Selection mode» entry.
Automatic selection mode: The handset automatically checks in to a
new telephone system.
Exclusive selection mode: You must check in the handset manually
(see «Select system»).
Pre-conditions: The handset is inside the radio coverage, identifies
the telephone system and is logged in to this telephone system.

Select system

....... Call up the «Select system» entry.
or
radio button of the desired system.
Accept the setting with the right softkey [OK]. The display goes back
to the «Select system» entry.

Edit system name

....... Call up the «Edit system name» entry.
72
FC4 / FC4 Ex (HS) connected with Mobility Server
Call up Menu > Setup > System settings, then
Using the Up and Down arrows of the selector key, select the
Call up Menu > Setup > System settings, then
Using the Up and Down arrows of the selector key, select the
Call up Menu > Setup > System settings, then