Funkwerk FT4 Operating Manual page 123

Legend (cont'd)
No. Designation
6 Resetting the alarm
a Personal alarm time
b Delay time / waiting
period
c Pre-alarm time
d Alarm time
e Reaction time
Will-independent emergency signal functions
Description
The alarm is terminated by user action on the radio
set or by a reset command from the personal emer-
gency signal centre.
Period of time between the occurrence of the alarm
condition (1) and transmission of the alarm (4).
The personal alarm time is the total of the delay time
(b) and the pre-alarm time (c).
Period of time between the occurrence of the alarm
condition (1) and beginning of pre-alarm on the radio
set (2).
The period of time can be individually programmed
for each individual will-independent emergency
signal function.
Period of time between the beginning of the pre-
alarm on the radio set (2) and triggering of the alarm
(4).
During this period of time, the radio set announces
the impending alarm. You can avoid the alarm by
acknowledging the pre-alarm during the pre-alarm
time (3) or by eliminating the alarm condition.
The period of time can be individually programmed
for each individual will-independent emergency
signal function.
Period of time between triggering of the alarm (4)
and alarm being reset on the radio set or a reset
command being issued by the personal emergency
signal centre (6).
(according to pre-standard DIN V VDE V 0825
part 1)
Period of time between the occurrence of the alarm
condition (1) and the arrival of the alarm at the per-
sonal emergency signal centre (5).
Personal emergency signal functions 119