Funkwerk FT4 Operating Manual page 69

Identification features
The following features of your radio set indicate to you that the direct mode is activa-
ted (in idle mode, without an active voice connection):
Direct mode (DMO): Identification features on your radio set
Legend
Identification feature
Display
Left signal LED
Activating the direct mode manually
If your radio set is not switched to direct mode (TMO), you can activate this mode
manually. Ensure that other subscribers are within the range so you can communi-
cate in this mode.
Carry out the following work steps:
1. On the display, navigate to
The N
ETWORK
2. Highlight the DMO
‹Right softkey›
3. Press the

Done.
Behaviour
Idle display reads
green, flashing slowly
MAIN MENU
menu is displayed.
menu item using the cursor keys.
key to select the menu item.
DMO.
> S > N
ETTINGS ETWORKS
TETRA basics
TETRA connection types
.
65