126
Personal emergency signal functions
Putting into operation
Logging in the radio set manually
If the automatic log-in procedure is programmed on your radio set, it will automatically
start the log-in procedure after it is removed from the charger. If manual log-in and
log-off is programmed on the radio set, you must log the radio set into the personal
emergency signal centre manually.
Carry out the following work steps:
1.
Unlock keyboard (if necessary).
2.
On the display, navigate to
The
S
ECURY
3.
Highlight the
?
The menu item
Activate the trunking mode (TMO), see section „Activating the trunking mode"
(p. 63).
MAIN MENU
menu is displayed.
L
menu item using the cursor keys.
OGIN
L
is not being displayed?
OGIN
> S
.
ECURY