Fitting The Tear-Off Cord; Affixing The Radio Set To Your Clothing - Funkwerk FT4 Operating Manual

7. P
OSITION ALARM

Position the radio set vertically. Wait for a short time.

Position the radio set horizontally. Wait for a short time.
The display changes to

The display shows the log-in status, e.g. "Secury - logged into Secury ser-
ver".
TIP
After completing the log-in, the radio set will react to all programmed emergency
signal functions and is constantly being monitored by the personal emergency signal
centre.

Fitting the tear-off cord

The tear-off cord is connected to the tear-off contact, see section „Triggering the loss
alarm" (p. 116). If the radio set detaches from your clothing or is forcefully torn off, the
tear-off cord is designed to open the tear-off contact and trigger a loss alarm.
Affix the free end of the tear-off cord to a suitable spot of your clothing near the radio
set. Ensure that the cord will neither be in your way as you work nor become a
hazard, e.g. by potentially coming into contact with rotating machine parts.

Affixing the radio set to your clothing

You should affix your radio set securely to your clothing directly after the sensor test.
To do this, use the clip or the bag.
Choose a suitable carrying position. Please bear in mind:

You must be able to reach all keys of your radio set reliably at any time.

The position alarm and the no-motion alarm must be reliably triggered in case of
an alarm.

The radio set must not come off your clothing by mistake.
TIP
While affixing the radio set, hold it vertically and do not move it too slowly in order to
avoid unintentionally triggering a position or no-motion alarm.
sensor:
OK if the sensor passes the test.
Personal emergency signal functions
Putting into operation
129