Funkwerk FT4 Operating Manual page 138

134 Personal emergency signal functions
Operation
4. Press the
The S
ECURY SENSOR TEST
The radio set will then prompt you to perform the sensor test, see section „Sensor
test" (p. 127).
After successfully completing the sensor test, the display indicates the current
log-in status, e.g. "Secury - logged into Secury server".

Done.
Please note:
During the sensor test, the sensors for all emergency signal functions programmed
on the radio set are being tested. In the meantime, you have to initiate a variety of dif-
ferent actions on the radio set. These actions are described in section „Perform the
sensor test" (p. 128).
If your radio set detects a faulty sensor, the pertinent display remains set to
The radio set transmits a technical alarm to the personal emergency signal centre.
Display with menu
‹Right softkey›
key to execute the function.
menu is displayed.
S
ENSOR TEST
T .
EST