Funkwerk FT4 Operating Manual page 36

32 Structure and function
Control elements
Legend (section 4 of 5)
No. Designation
11 Hanging up
12 1 to 9, 0
Function
The following functions are possible, depending on the
operating situation:

Switching on the radio set.

Terminating the voice connection.

Switching off the radio set.

Displaying the idle display.
In addition, this key enables the performance of the fol-
lowing functions:

Cancelling the connection setup.

Rejecting an incoming voice call.

Marking a text message as read and closing the mes-
sage.

Terminating the wake signal.

Terminating the pre-alarm.

Terminating the alarm.
The following functions are possible, depending on the
operating situation:

Entering digits and letters, key
entering special characters.

Speed dialling of a fixed target (according to program-
ming of the radio set). Press the key long to execute
this function.
For speed dialling, one of the following functions can be
programmed:

Dialling the call number of a group (GSSI)

Dialling the call number (ISSI) for an individual call

Transmitting a status message

Transmitting an SDS text message
‹1›
also allows for