Funkwerk FT4 Operating Manual page 135

Acoustic signals for signalling alarms (default settings)
Event
Alarm 1
Alarm 2
Warning alarm 1
Warning alarm 2
During that time, evaluation and processing of the event starts at the personal emer-
gency signal centre.
First, the personal emergency signal centre personnel confirms receipt of the alarm.
Your radio set receives the acknowledgement. The display shows the following mes-
sage:
Display content after acknowledgement of receipt at the personal emergency signal centre.
After the personal emergency signal centre personnel has taken all necessary steps,
the personal emergency signal centre grants the radio set the permission to reset the
alarm. The display shows the following message:
Signal tone
Very loud, quickly alternating tone sequence with high and low
tones.
Very loud, slowly alternating tone sequence with high and low
tones.
Very loud, quickly alternating tone sequences with tones of
similar frequency
Very loud, slowly alternating tone sequences with tones of
similar frequency
Personal emergency signal functions 131
Operation