Funkwerk FT4 Operating Manual page 90

86 Operation
Individual calls
2. Press the
gateway (telephone, TETRA, ...) , then press the
a user in the user list, press the
The connection is set up.
The display shows the call number or the name of the called subscriber.
As soon as the called party accepts the call, the connection is set up.
3. Hold the radio set close to your ear like a telephone receiver for listening and
speaking.

Done.
TIP
The settings of your radio set are individually programmed by the radio set operator.
You may be able to start a call to a pre-set target by means of a speed dialling key as
well. If you have any questions, please contact the responsible system administrator
for your communication facilities.
‹Right softkey›
key if the C function is available to select a
ALLING
‹Pick up›
‹Pick up›
key twice.
key. Or, after marking