Will-Independent Emergency Signal Functions; Alarm Types; Triggering The Loss Alarm - Funkwerk FT4 Operating Manual

116 Personal emergency signal functions

Will-independent emergency signal functions

Will-independent emergency signal functions
Will-independent emergency signal functions are automatically triggered by the radio
set if you are in certain situations while in possession of the radio set. The triggering
conditions can be caused "intentionally" or "accidentally".

Alarm types

At the factory, the radio set is set to provide the following will-independent emergency
signal functions:
Will-independent emergency signal functions of the radio set
Alarm type
Position alarm
No-motion alarm
Loss alarm
Time alarm
TIP
Ask the system administrator of your communication systems which personal emer-
gency signal functions are programmed on your radio set.

Triggering the loss alarm

The loss alarm is triggered by the tear-off contact.
Tear-off contact for triggering the loss alarm
Condition for release
Radio set is tilted too far. The tilting angle is program-
med by the operator of the personal emergency signal
system. The standard value is 55° (based on a vertical,
upright position, tolerance ±5°).
The radio set is not moved.
The tear-off contact is pulled out.
The radio set is not actuated within a certain period of
time (dead man's time).