Charger - Funkwerk FT4 Operating Manual

Charger

Safety instructions for charger use:

The charger and the plug-in power supply unit are designed for use in an office-
type environment.

Operate the charger near a socket outlet installed properly by specialist personnel.
The specifications on the plug-in power supply unit (e.g. 100 V to 240 V, 50 Hz to
60 Hz) must match those of the available mains power supply.

The plug-in power supply unit and the outlet must be accessible at all times.

Use an anti-slip pad for the charger, especially on new or polish-treated furniture.

Protect the charger against heavy dirt, dust, humidity and moisture as well as
direct heat radiation.

Varnishes or polishes may contain substances that soften the base of your char-
ger. The softened base can leave unwanted spots on furniture surfaces. Funkwerk
Security Communications GmbH will not be liable for such damage.

The charger and the plug-in power supply unit do not contain any parts that can be
repaired or serviced by the user. Any manipulations are allowed only by the manu-
facturer or by authorised technical personnel.
Be careful when handling damaged plug-in power supply units:

Danger to life when touching live parts connected to the mains.

Before disconnecting an externally damaged plug-in power supply unit from the
outlet, de-energise the outlet, e.g. by switching off the fuse of the relevant circuit.

Replace a damaged charger or plug-in power supply unit with an original spare
part, even if only the connecting cord is damaged.
Conformity and approvals
EC declaration of conformity
23