Funkwerk FT4 Operating Manual page 52

48 Structure and function
Display
Settings
Functions in menu
Designation
Signal profile
Signal tones
Display
Languages
Date & time
Networks
Unit information
Function
Displays the available signal volume profiles.
Changing the pre-set profile modifies several
settings at the same time and allows adapting
the signalling to environments with different
loudness levels. You can switch the vibration
signal on and off along with every signal profile.
Key tone Selects the type of confirmation tone (key tone)
and switches it on or off.
If the key actuation tone is switched on, each
key operation is confirmed acoustically.
Illuminance Adjusts the brightness of the display.
Illumination Sets the time after which the display illumination
duration goes out.
Colour scheme Displays the available colour profiles for the dis-
play. You can adapt the colour appearance of
the display by changing the pre-set profile.
Changes the language settings of the display.
Sets the date and time.
Changes the pre-set connection type (TMO or
DMO).
So long as the radio set is logged into a perso-
nal emergency signal centre, the connection
type TMO is permanently set.
Displays the following information:




Version (software and hardware version of
radio set)
Network data (MMC, MNC, network name,
individual call number of radio set ISSI)
Extended data if enabled (hardware test, IOP
test mode, RSSI values, RSSI plot, see FT4
configuration instructions)
IOS test mode (received IOS data)