Funkwerk FT4 Operating Manual page 129

Login types
When the radio set is programmed, the operator defines how the radio set will log
into the personal emergency signal centre. One of the following login types is pro-
grammed on the radio set:
Login types of the radio set to the personal emergency signal centre
Programmed value
"automatically"
"automatically and manu-
ally"
"manually"
Description
The radio set logs into the personal emergency signal
centre automatically as soon as you remove it from
the charger or start it up by attaching the battery.
Before the radio set logs into the personal emergency
signal centre, the radio set will prompt you to perform
a sensor test, see section „Sensor test" (p. 127).
The radio set will automatically log out of the personal
emergency signal centre when you place it back in the
charger.
Manual log-in and log-off to the personal emergency
signal centre are not possible.
Your radio set automatically logs into the personal
emergency signal centre as soon as you switch it on
or after you remove it from the charger.
Before the radio set logs into the personal emergency
signal centre, the radio set will prompt you to perform
a sensor test, see section „Sensor test" (p. 127).
You can abort the sensor test and operate the radio
without emergency signal functions.
After completing the mission, manually log the radio
set out of the personal emergency signal centre. If
needed, you can log it back in manually.
You have to log the radio set into the personal emer-
gency signal centre manually, see section „Logging in
the radio set manually" (p. 126).
After completing the mission, you have to log the radio
set out of the personal emergency signal centre
manually.
Personal emergency signal functions
Putting into operation
125