First Steps; Programming; Putting The Radio Set Into Operation - Funkwerk FT4 Operating Manual

First steps

This chapter describes how to put the radio set into operation.

Programming

Before using the radio set in daily operations for the first time, it must be programmed
with all required operational data and the desired function options and parameters.
The programming procedure requires a configuration tool, consisting in a PC and a
configuration program. Ask your specialist retailer for more information..
The data to be programmed take into account the operating conditions as well as
individual requests from the operator/user. They are stored in the radio set.
If required, the settings can be saved on a Micro-SD card.

Putting the radio set into operation

Prerequisite:

A frequency must have been assigned for TETRA operation.

The radio set must be programmed.

The trunking mode (TMO) must be activated if the radio set is to be used within a
TETRA infrastructure.
Carry out the following work steps:
1. Carefully place the antenna on the antenna socket of the radio set.
First steps 51
Programming