Two-Way Call (Direct Through) - Funkwerk FT4 Operating Manual

88 Operation
Individual calls

Two-way call (direct through)

At the factory, two-way calls are configured in "direct through" mode. A call in the
"Direct Through" mode is a half-duplex voice connection during which you alternatin-
gly set the radio set to transmit mode (by keeping the PTT button pressed) or in
receive mode (by releasing the PTT button). The hands-free talking mode is activa-
ted, and the loudspeaker is on. The called subscriber does not need to accept the
call to hear you. Either you or the called user can speak.
Starting a call
Prerequisite:

The display shows the idle display or the screen saver.
Carry out the following work steps:
1. Enter the call number. Choose one option:

Entering the call number using the number keys.

Selecting the call number from the subscribers' list: Navigate to
A
DDRESSES
The condition as shown appears in the following cases:

After entering the call number.
After highlighting the user and ‹Calling›.


After highlighting the user and actuating (pressing or releasing) the
(transmit key)›
Starting from this display, start the call with the
keep pressed and talk; release and listen).
2. Press the
‹PTT (transmit key)›
>U in the display and highlight the desired user.
SER LIST
key.
‹Right softkey›
key if the
key and hold it down. Or, after highlighting a user from the
‹PTT (transmit key)›
C function is available, then press the
ALLING
M >
AIN MENU
‹PTT
key (thumb,