Please make a note of the serial number of the handset and SIM issued to you and keep in a safe place. The enclosed GSM-R handset is issued for business use only in connection with the operations of the GB Rail Network and must not be used for any other purpose.
Trackside Worker GSM-R User Guide Contents Warning and Security ..........3 Operational Use ............ 3 Contents .............. 4 About the Contents ..........6 Safety Information ..........7 Battery..............7 Charger and plug-in power supply units ....7 Controls and Buttons ..........8 Operating Elements ..........
Page 5
Add contact ..............25 8.3.2 Edit Contact ..............25 8.3.3 Delete Contact ..............25 GSM-R Handheld Warranty and Returns ....26 Terms of Warranty ..........26 Warranty Process ..........26 Warranty Return Address ........26 Breakage and Out of Warranty Repairs ....26 Network Support ..........
Intentionally Left Blank About the Contents This document describes the main analogue and digital operation mode for GSM-R on the Funkwerk OPH handheld, including a general overview of the controls and functions. Please note safety instructions in the individual chapters...
Safety Information The handhelds are for operational railway communications only. Note on use Switch the handheld off if it is damaged or is not in perfect working order. Prevent it from being used and arrange for it to be tested by authorised personnel. Protect the handheld from extreme weather conditions.
Keyboard Buttons for direct input of the numbers and characters. Accept-/ Send button For initiating or accepting a GSM-R calls. Press the button once to open the "Dialled numbers" submenu in the display. Left-hand selection button Press the button to perform the function displayed function directly above the button.
Trackside Worker GSM-R User Guide Switch on / off Handheld Note: The battery must be fully charged before using the handheld for the first time. Switch on Trackside GSM-R Hand held Press the Exit button The display and keypad light-up. The handheld performs a self- test.
2 bars = 30 t0 50% battery unread text messages exist in the message inbox. 3bars = 50 to 75 % battery missed call in GSM-R 4bars = 75 to 90 % battery Signaling the Shunting Mode bars = 90 % to 100 % battery capacity The battery is defective.
Trackside Worker GSM-R User Guide Pictograms in the Display Field Incoming point-to-point call Setup of a conference call Setup of a point-to-point call Existing conference call Existing point-to-point call Conference call is busy Point-to-point call is placed on hold Conference call failed...
Locking and Unlocking Keyboard 5.5.1 NOTICE If the key guard button is pressed, the buttons are locked. If the key guard is activated, only emergency calls can be sent using the emergency call button or dialing 999 On the home page, press the navigation button and then the ►...
Trackside Worker GSM-R User Guide Setting up and Terminating Calls To make a call on the phone dial the required number and press the send button. The "Establishing call" message and the corresponding pictogram of the call destination appear in the display filed.
Hold During existing calls it is possible to place the existing call on hold and to setup another call. You can toggle between the two calls. Initiate state You are already on a call. Press the left-hand selection button Options. Select the entry Add call.
Trackside Worker GSM-R User Guide Setting up a Group Call or Broadcast Call Requirement: A Group call or Broadcast call can only be set up using group programmed on the SIM. Group- and Broadcast call from the phonebook: Open the menu Phonebook Broadcast call VGC [x] / VBC [x].
Calling the Operational Terminals There are two ways to call the operational terminals Dialling the short code When using the Short code the GSM-R Network will decide which terminal to route the call to Dial the terminal phone number 6.6.1...
Trackside Worker GSM-R User Guide 6.6.3 Calling the ECR Dialling the Short code: Enter the 1400 using the keyboard. Push the send button The display shows the call number and the dialling symbol. Listen and speak like a conventional mobile phone.
Create Message The handheld can send other OPH handsets messages. Your handheld supports sending messages beyond the character limit for a single message. Longer messages are sent as two or more messages. You have the ability to send text messages or flash messages. A flash message will appear immediately on the recipient's device.
Trackside Worker GSM-R User Guide Text- or Flash Messages Options After you open the message, press the left-hand selection ► button Options. The following options are available: Delete · Details · Answer · Forward · Delete Select the entry Delete.
On the main page, press the Menu navigation button to open the main menu. Use the buttons to select the required submenu. Open the menu using the left-hand selection button Select. Main menu GSM-R Main Menu Symbol Name Short Description Messages This menu contains functions related to text messages.
Trackside Worker GSM-R User Guide Messages Menu Name Short Description Create message create new message Inbox List of the unread / read and received short text messages Outbox List of written short text messages, which have not yet been sent...
Adjust Settings The handheld can be adapted in a limited way to personal needs. The following settings only can be changed: General Settings (Language, Date / Time, Brightness,…) · Net settings · Changes can be made at any time. The input is cancelled if a state change occurs during setting mode.
Trackside Worker GSM-R User Guide 8.1.2 Set Brightness The TFT displays background brightness can also be individually adjusted. Open the menu Settings General Brightness. The brightness level is depicted in the status field by the blocked in levels. A 30-step fine adjustment is possible.
Phonebook There are two ways to get to a phone book entry: Open on the home page the left-hand selection buttons Names. ► Open the menu Phonebook. ► Symbol explanation Icon Description Contacts which are stored on the SIM card. Contacts which are stored in the handheld.
Trackside Worker GSM-R User Guide GSM-R Handheld Warranty and Returns Terms of Warranty The GSM-R handheld issued via NRT are warranted for 12 months from time of delivery against manufacturing defects. Warranty Process All warranty issued are raised with the unit supplier by contacting their help desk...
Useful Numbers Calling From Calling to Code Format Handheld Local Signaller 1200 Handheld Local Route Control 1300 Handheld Local ECR 1400 Handheld Calling out to NR Extensions 901 085 XXXXX NR Extensions Handheld 01 8XXXXX Handheld Calling Rail Net Extensions 901 XXX XXXXX Rail Net Extensions...
Page 28
Trackside Worker GSM-R User Guide Intentionally Left Blank March 2015 Page 28...