Funkwerk FT4 Operating Manual page 87

Switching the scan function on/off
You can switch the scan function on and off at any time when a scan list is marked as
"selected". When a scan list is selected and activated, your radio set monitors the
radio traffic in all associated groups. When receiving a call, the hands-free talking
mode is activated and the loudspeaker is switched on.
Carry out the following work steps:
1. On the display, navigate to
The S
CAN LISTS
2. Highlight the A
‹Right softkey›
3. Press the
After a short time, the title of the menu item changes from
D
EACTIVATE SCANNING
The scan function is now active.
The symbol of the "selected" scan lists changes as follows:
The idle display screen shows the message "Scanning groups".
MAIN MENU
menu is displayed.
CTIVATE SCANNING
key to execute the function
.
> A
DDRESSES
entry using the cursor keys.
Group calls
> S .
CAN LISTS
S .
ELECT
A
CTIVATE SCANNING
Operation 83
to