Funkwerk FT4 Operating Manual page 35

Legend (section 3 of 5)
No. Designation
5 Function key 3
6 PTT (transmit key)
7 Left softkey
8 Right softkey
9 Cursor keys
10 Picking up
Function
Execution of a pre-set function: Press the key to execute
the function.
Depending on the programming of the radio set, one of
the following functions is possible:

No function.

Toggling the operating type between TMO/DMO.
Changing the operating mode is possible only when
the radio set is not logged into a personal emergency
signal centre.

Switching the screen saver on/off.

Confirming a group selected via rotary switch or
menu.

Vertical cursor movements up.

Vertical cursor movements down.
Starting and controlling an individual call (direct through)
or a group call:

Press key long for setting up a connection and talking
while the connection is active.

Release key to hear other subscribers.
Executing the menu function shown in the footer at the
bottom display edge: Press the key for executing the
function displayed directly above the key.
Executing the menu function shown in the footer at the
bottom display edge: Press the key for executing the
function displayed directly above the key.
Changing the selection marking on the display. Press
cursor keys to move the select marking or the cursor to
the left, right, up or down.
The following functions are possible, depending on the
operating situation:

Starting or accepting an individual call in duplex mode
(full duplex voice connection)

Show S
ELECTED NUMBERS
list) in the display.
Structure and function
Control elements
list (automatic redialling
31