Time Sequence - Funkwerk FT4 Operating Manual

Time sequence

Each will-dependent alarm results in the alarm being transmitted directly after trigge-
ring. There is no delay and no pre-alarm.
Time sequence of will-dependent emergency signal functions in case of alarm
Legend
No. Designation
1 Alarm condition occurs You, the user of the radio set, detects a dangerous
4 Triggering the alarm
5 Arrival of alarm at the
personal emergency
signal centre
6 Resetting the alarm
d Alarm time
e Reaction time
Will-dependent emergency signal functions
Description
situation.
You, the user of the radio set, intentionally triggers a
will-dependent alarm transmitted to the personal
emergency signal centre. The radio set starts signal-
ling the alarm (d). This will continue until the alarm is
reset.
The alarm is received by the personal emergency
signal centre. The personnel at the personal emer-
gency signal centre begins to initiate emergency
measures.
The alarm is terminated by user action on the radio
set or by a reset command from the personal emer-
gency signal centre.
Period of time between triggering of the alarm (4)
and alarm being reset on the radio set or a reset
command being issued by the personal emergency
signal centre (6).
(according to pre-standard DIN V VDE V 0825
part 1)
Period of time between the occurrence of the alarm
condition (1) and the arrival of the alarm at the per-
sonal emergency signal centre (5).
Personal emergency signal functions 115