Setting Up A Group Call Or Broadcast Call; Incoming Group Calls - Funkwerk GSM-R User Manual

Trackside Worker GSM-R User Guide
6.4

Setting up a Group Call or Broadcast Call

Or
6.5

Incoming Group Calls

10 March 2015
th
Requirement:
A Group call or Broadcast call can only be set up using group programmed on
the SIM.
Group- and Broadcast call from the phonebook:
1. Open the menu Phonebook  Broadcast call  VGC [x] / VBC [x].
2. Push the send button
The display shows the VGC / VBC and the dialling symbol.
3. Press down the PTT button to speak.
4. Release the PTT button after speech.
5. Push the exit button
The display shows the VGC / VBC and the derogation symbol.
1. Open the menu Phonebook  Broadcast call  VGC [x] / VBC [x].
2. Press the left-hand selection button Select.
3. Select the entry Call.
4. Confirm with the left-hand selection button Select.
The display shows the VGC / VBC and the dialling symbol.
5. Press down the PTT button to speak.
6. Release the PTT button after speech.
7. Push the exit button
The display shows the VGC / VBC and the derogation symbol.
Incoming group calls are set up with a pre-determined priority level.
Existing speech or data connections with a lower priority will be
terminated.
The incoming group call is announced by an attention tone.
6. Confirm with the left-hand selection button Select.
7. Select the entry Join.
8. Confirm with the left-hand selection button Select.
The display shows the VGC and the dialling symbol.
5. Press down the PTT button to speak.
6. Release the PTT button after speech.
7. Push the exit button
The display shows the VGC and the derogation symbol.
.
, to terminate the outgoing call.
, to terminate the outgoing call.
, to terminate the outgoing call.
Page 16