Setup & Operation 2. Specifications
2. Specifications
2.1 Features of LS series Manipulators
The LS series Manipulators are advanced manipulators pursuing high speed and high
cost-performance.
The features of the LS series Manipulators are as follows:
Resolver for the Position Detector
Large Capacity
Tact Time Improvement by High-speed Motion
16
It includes no electrical components; therefore it has high resistance to environment
and hardly breaks down.
It mounts the resolver board and battery inside the manipulator; therefore the
calibration is not required when you disconnect the M/C cable.
It supports the U-axis allowable moment up to 0.12 kg·m
It stably handles large loads by optimized control based on the each load.
It improves the tact time of long-range movements by readjusting the highest speed.
(LS3)
It improves the tact time of delicate movements by acceleration/deceleration speed
optimized for each payload and stop short technology.
2
2
(LS6) / 0.05 kg·m
(LS3).
LS Rev.10