Assembly And Commissioning; Training Of Assembly/Commissioning Personnel; Storage Conditions; Installation Conditions - WAGNER GM 4700AC Original Operating Manual

Aircoat manual gun for flat and round jet nozzles

Hide thumbs Also See for GM 4700AC:

Table of Contents

VERSION 06/2018

ASSEMBLY AND COMMISSIONING

6.1

The assembly and commissioning personnel must have the technical skills to safely

commission the device.

When assembling, commissioning and carrying out all work, read and follow the

operating manuals and safety regulations for the additionally required system

components.

A skilled person must check to ensure that the device is in a reliable state after it is installed

and commissioned.

6.2

Until the point of assembly, the device must be stored in a dry location, free from vibrations

and with a minimum of dust. The device must be stored in closed rooms.

The air temperature at the storage location must be between -20 °C and 60 °C (-4 °F and

140 °F).

The relative air humidity at the storage location must be between 10 and 95% (without

condensation).

6.3

The air temperature at the installation site must be in a range between 0 °C and 40 °C (32

°F and 104 °F).

The relative air humidity at the installation site must be between 10 and 95% (without

condensation).

ORDER NUMBER DOC2311730

Table of Contents

Gm 4700ac-h