Assembly And Commissioning; Training Assembly/Commissioning Staff; Storage Conditions; Installation Conditions - WAGNER PEA-C4-HiCoat Translation Of The Original Operating Manual

VERSION 05/2012
OPERATING MANUAL
6

ASSEMBLY AND COMMISSIONING

6.1

TRAINING ASSEMBLY/COMMISSIONING STAFF

Incorrect installation/operation!
Risk of injury and damage to the device.
6.2

STORAGE CONDITIONS

Until the point of installation, the powder spray gun must be stored in a dry location, free
from vibrations and with a minimum of dust. The powder spray gun must be stored in
closed rooms.
The air temperature at the storage location must be between 5 - 45 °C; 41 - 113 °F.
The relative air humidity at the storage location must not exceed 75%.
6.3

INSTALLATION CONDITIONS

The air temperature at the installation site must be between 5 - 45 °C; 41 - 113 °F.
Depending on the powder paint used, the maximum permissible ambient temperature for
reliable operation can be signifi cantly below +40 °C; 104 °F.
The relative air humidity at the storage location must not exceed 75%.
ORDER NUMBER DOC 390829
WARNING
The commissioning staff must have the technical skills to safely
undertake commissioning.
The commissioning staff must be familiar with the provisions of
European standard DIN EN 50177.
When putting into operation and for all work, read and follow
the operating manual and safety regulations for the additionally
required system components.
PEA-C4-HiCoat
21