Specifying A Custom Paper Size - Ricoh Aficio SP 3400SF User Manual

Specifying a custom paper size

This section describes how to specify a custom paper size.
Important
❒ Custom size paper cannot be loaded in tray 2.
❒ When you perform printing, make sure that the paper size specified with the
printer driver matches the paper size specified with the control panel. If a pa-
per size mismatch occurs, a message appears on the display. To ignore the er-
ror and print using mismatched paper, press the {Start} key. If the paper is too
small for the print job, the printed image will be cropped.
A
Press the {User Tools} key.
B
Press the {U}{T} keys to select [Machine Settings], and then press the {OK} key.
C
Press the {U}{T} keys to select [Paper Settings], and then press the {OK} key.
D
Press the {U}{T} keys to select [Paper Size], and then press the {OK} key.
E
Press the {U}{T} keys to select the desired tray, and then press the {OK} key.
F
Press the {U}{T} keys to select [Custom], and then press the {OK} key.
G
Press the {U}{T} keys to select [mm] or [Inch], and then press the {OK} key.
H
Enter the horizontal value using number keys, and then press the {OK} key.
You can press the {U}{T} keys to change the value in 1 mm or 0.01 inch in-
crements.
I
Enter the vertical value using number keys, and then press the {OK} key.
You can press the {U}{T} keys to change the value in 1 mm or 0.01 inch in-
crements.
J
Confirm the setting, and then press the {OK} key.
K
Press the {Clear/Stop} key to return to the initial screen.
Note
❒ You can press the { } key to exit to the previous level of the menu tree.
BSP051S
Loading Paper
2
83