Festo CDVI-DN Manual page 21

1. Installation
Festo P.BE-CDVI-DN-EN en 0805a
Note: Expansion blocks
B
A
A Manifold block
B Single or double expansion blocks
If you extend the manifold block (with 4 or 8 valve positions)
by single or double extension blocks, these extension blocks
will be automatically identified.
Setting the address assignment 2
Set the address assignment as illustrated in the following:
Address assignment
Automatic address assignment
of the CDVI (modular EDS)
Addressing to maximum expan-
sion of the CDVI
Tab. 1/2: Setting the address assignment
DIL switch positions
1-9