Explicit Message - Festo CDVI-DN Manual

2. Startup

2.2.7 Explicit message

Object Attribute
class
8 3
d d
9 3
d d
100 3...8
d
101 3
d
102 1...6
d
2-28
The parameters specified in chapter 2.2.6 can also be read
and written by the PLC. To do so, communicate via "Explicit
Message." Refer to the manual for your controller for informa-
tion on programming this data transmission.
The following object descriptions are required to address the
CDVI-DN:
Object name
Discrete Input Point Object
Discrete Output Point Object
Festo Discrete Output Object
Festo Discrete Input Object
Festo Diagnostics Object
Detailed object descriptions can be found in Appendix B.
Type
Boolean
Boolean
UINT
UINT
(Various)
Festo P.BE-CDVI-DN-EN en 0805a